References edit
Yes, there are a few articles, without references. I was unable to find references for them at that time. I will complete the articles with references today most probably. Thanks for bringing it to my attention Muhammad Ali Khalid
categories edit
Andrew, can you check categories when you check people articles? Thanks Ray
Company Logos edit
Do you need help with those? Ray
I haven't tried to do them yet as I've been working on my parent's computer and don't want save images to their computer..as I imagine I'll have to do... I'll add them tomorrow when I switch to my own laptop.Andrew
- ok great, I sent you an e-mail too Ray
Redirecting Articles edit
Yeah, I redirect them at the end of the project when I have completed the set of 50 articles, somehow it makes the work easier for me :). You do not need to redirect the articles, I will do that myself.
For the getting more content. Sure I will try to dig deeper to get more about the people. Muhammad Ali Khalid
Articles needed edit
Can you update this page with Pulasthi's work and as well consolidate other completed batches, thanks Ray
- Great, and keep the done articles neatly on the user pages of the folks who did them? Ray
hi! edit
Thanks for the feedback. I try to keep the names consistent...specially the company names and initials..but I am not really very good with the technical stuff cctld tld etc are okay but sometimes there are more and I dont really know what to do with them except simply interlinking them by putting a [[]]. The only content I have copied are either from the old icannwiki or icannn site. And creative common contents...like the same bios that have been used in 4-5 websites( official website, yahoo finance, crunch base, linkedin) I thought these are okay. Let me know if its not. I will still go through the articles and see if there are more. As for regular work, I will sure love to work more. But I have a little complicated situation right now. I am involved in a national project right now and today I have been told that they are going to offer me a full-time job. So lets finish the last batch right now and we can take it from there. Regards
Glad to be here edit
Hi, Andrew. First of all, nice to meet you:) Secondly, thanks for your help and assistance. Third of all, thanks for feedback. I will get some sleep now but in the morning I will introduce the references (will check your articles), and will also do 2 more articles. It will take some time until i get used to all the features, but I will manage it. Keep in touch! User:Dana Silvia Hi, Andrew! Thanks for adding the part with ICANN and DNSSEC, looks great. I saw you added the references, should I add some more? Soon I will start writing 2 more articles.
Article References edit
Hi, Andrew. I added the references for both articles, finally I managed to understand how it should be done:D Soon I will upload some more articles.Please do check the references of my 2 articles when you have some spare time and let me know if there are any problems. Thanks, Dana.
Glossary edit
Hi, Andrew. Thanks for your feedback, I checked all articles until now and added the category:Glossary. Will upload 2 more articles soon. Regards, Dana.
Table of contents edit
Andrew, I saw that in an article it was inserted _NOTOC_ and this makes the table of content to disappear. Should I do this in some other cases or not..? Thanks, Dana.
Ok, then it's good I asked. I will check all articles and make the necessary changes. In the case of articles with the length of TLD article I will not introduce the Table of Contents. Thanks for a quick answer. Dana
Domaining Glossary and definitions edit
Thanks for your feedback. I removed all Domaining Glossary sources because I noticed that this section will be deleted and the link will no longer work, but somehow it was left for domain kiting. I changed it. Regarding the links for definitions at Direct Navigation, I copied the wrong link there for that definition, changed it:) Thanks for feedback, and please do not hesitate to tell anything else regarding mistakes or discrepancies. Thanks, Dana
What is RGP? edit
Hi Andrew, I am now trying to finish the articles but I do not what RGP refers to.... please help me if you can :) How are the articles? I wrote to Ray yesterday and asked him to take a look over the articles and tell me if there are any problems but received no answer. What is your opinion regarding my work? Regards, Dana
Ok, thanks, got it! Can please also help with the acronym "SO" what does it stand for? Yeah, in the short overview there are cases when i give another definition of the concept to make sure it is properly understood. There are still 3 articles which I will not be able to finish until the deadline on vworker.com... do you think this will be a problem?I will finish the project in around 4 hours, but the deadline is arriving in around 40 minutes or so... could you please talk to Ray? I hope everything will be ok.
Editing Process edit
Hi Andrew. I am ready to make the changes you say, while you are reviewing the work. I have to mention the fact that I am leaving for Barcelona from 24th until the 28th and I will be unavailable. I will try and improve the articles but regarding what you said "either they need reference attention or just felt like certain sections could be stronger" - I tried to present in each article what I found as more useful and interesting since you and Ray did not mention what subjects I should focus on each article or so.... I will wait for your comment and do my best. Will wait for your reply. Regards, Dana
Yes, you are right, and I appreciate your feedback. Then, when you have some time to sum up some conclusions/changes/improvements regarding to some of my work you have already reviewed, let me know and I will start making the changes. Then, you can check the content once again and tell me it's ok. I hope I will also have a great time in Barcelona. Until the 24th I will try and do my best to finish the project so that we will all be satisfied with the results. Thanks, Dana
Ok, I notice those, now I understand the comments. If I want to modify something based on your comments, I will make the changes, and check the "watch this page" button or "This is a minor edit" button? Or how should I let you known that I have made the changes - write in summary? thanks, Dana
Hi, Andrew. I started making changes to what you mentioned in the list. Tomorrow will finish the changes and let you know, so that you can check these modifications. Keep in touch, Dana
Hi Andrew, I finished making the changes. Please check the changes made:) Still, there are five changes which I didn't know how to deal with - listed below:
- Semantic technology- very unclear
- ARIN - Will need Business template imported from here and filled out as much as possible. - don't know how to do that.
- LACNIC - Will need Business template imported and filled out as much as possible
- RSEP - This article is very unclear.
- W3C- will need business template imported and filled out
Thanks Andrew, Ok, I will take a look at the articles when I get back. Yes, I would be interested in another project of 50 articles, I am now used to the system. Whether you want me to write about "People" or articles as before - what you prefer and need. Thanks. I can't wait:D I will also go the basketball match of Fc Regal Barcelona with another team in the ACB League since I am a big fan and player of basketball. I can't wait:D I will definitely drink Sangria, hope I'll like it! Thanks for everything. Will let you know when I get back. Regards, Dana
Alexander Phoenix edit
Hi Andrew, Thanks for all the kind words and support, it's really appreciated.
I've already added a list of 'articles being worked on'.
My Immediate Plans:
Now, a few thoughts.
First, I hope to move around 50 articles from .org to .com before the end of the week. This doesn't mean that I'll only be moving articles, obviously - I'll also be creating new ones, as you suggested. If you would like to suggest any particular articles that you'd like created, please go ahead and do so.
Obviously, I'm working on moving pages first, because that goes a little faster, and I want to get it out of the way.
Regarding References for ICANNWiki.org articles:
As for references, as the articles from .org are original work, they aren't as easy to find references for from the net (in searches) as it would be to find references for articles I write myself, for example (as I did when I wrote articles upon companies earlier).
I'll gladly put in references for the moved articles from the internet, but would like to do them at the end of moving all the (around 40) articles, if you don't mind. This should only take me two days or so.
So (extremely temporarily) the articles I add here will have no references at all.
But this will only be for about two days or so, when I will add references for them all simultaneously. I find this system more time efficient. In any case, the new articles will be unreferenced for just two days, which shouldn't really be a problem, as they can all be considered 'works-in-progress' until the references are in place.
Take care, and it's a pleasure to work with you, and on ICANNWiki.
- Alexander
Spam edit
So we finally got our first spam. You can see it in recent changes, I reverted it already. I'm sure this will happen more and more as the site becomes more popular so we'll have to be on the lookout for it and take action as needed Ray
- Ugh, beginning to see more of it ...
Hi again! edit
Hey, got your note! Sorry for replying so late, been really busy :( The section looks great... And yes, I am hoping to continue working in site as well, decided to pass the job offer. And I am really really sorry that I couldn't get around to edit the articles like you suggested. I will start checking them from tomorrow and make changes if necessary. In the meantime, please keep me updated and let me know if you have any more suggestion. Regards
Caricatures and references edit
Hi there, putting in the caricatures and references now. Don't worry, it's very easy to keep track of things because the Icannwiki.org site is still up and provides reference. I decided to do the portraits at one time because I'm resizing them to fit more neatly and need to use graphics editing programs to do that, so of course it's more convenient to do all the graphics editing at once
completed my 2nd batch edit
hi there,
I completed my 2nd batch. I'm really sorry for being late, since it was a busy week last week. Hope it's ok. Take a look at it n give me a feed back. thank you --Pulasthi 23:12, 12 February 2011 (PST)
thanks edit
hi andrew thanks for the feedback. Will fix them before tomorrow. Yeah i'm ready for another batch. Thanks again. --Pulasthi 02:00, 15 February 2011 (PST)
Balram Mahendra profile - couldnt find sources edit
i fixed the other two pages. But for Balram Mahendra, i could not find any sources. May be he is using another name or something. --Pulasthi 04:12, 15 February 2011 (PST)
Company Template edit
Twitter Field Added (but not tested) Ray
Can we move the twitter field above key people? Caterina
completed my 3rd batch edit
hi andrew,
Completed my 3rd batch. Please check it out. But couldnt find usable references for few of the profiles.
Thanks --Pulasthi 05:50, 21 February 2011 (PST)
Daniel and Marie edit
Look like they might need a little help getting started :-)
Uh... edit
so sorry, check your e-mail, I think we're going to need a disambiguation page ...
3rd batch edit
hi,
Thanks for the feedback. But it was not clear where the noted that you and catrina have put. Yeah you are right. most of the content that i took from the the .org site i did not change since we are going to delete that content afterwards. for most of the content, i did google search to see if there are copy issues.
thank you. --Pulasthi 00:46, 27 February 2011 (PST)
PS: I have sent a note in vworker to ray, regarding accepting work before 28th. Hope that can be done.
Alexa edit
Nice job with her article! Ray
hi edit
yeah of cos. will do the fixes. thanks --Pulasthi 14:26, 28 February 2011 (PST)
unfinished work edit
i andrew, I will be finishing the unfinished tasks before 6th march 2011. This week got un expectedly busier. So i will surely finish them before end of this week end. Thank you. --Pulasthi 07:42, 3 March 2011 (PST)
Under Construction edit
This is probably late, but an idea would be to make an "Under Construction" image, that way we can easily see what's under construction by seeing what links to that image Ray
Just wanted to let you know edit
Hi, I just wanted to let you know that, these three articles Brandon CS Sanders, Cassio Vecchiatti Chung-Hee Jin are incomplete. I started working on these articles in my first batch, but because of less resources (or I don't remember the reason) I stopped working on these articles and added some other articles to my work. You can delete these pages. Though, I have added the under construction image to them so that they stay in your sight.
People category Dana edit
Hi Andrew, I am trying to find people with relevant and useful information to create articles of around 500 words. However, I have seen that there are some articles created by other people of around 200-300 words... So, i only wanted to check that I am doing the right thing: I should focus on relevant people and write around 400-500 words, right? I see that there are more writers working on this section and I hope I will find plenty of relevant people and information about them. Plus, I cannot find facebook id and twitter for all people, is that a problem? Tell me your opinion if you can, please. Thanks for your support. Dana
Checking the work edit
Hi Andrew! I hope you are doing fine. I just wanted to let you know that in 1-2 days I will finish the content so that you cans start checking my work when you can. I hope I did a good work. Really did a lot of research regarding the available people, but I will wait for opinion:D Regards, Dana
Batch 3 finished edit
Hi Andrew! How are you doing? I only wanted to let you know that I have finished Batch 3 of articles and you can start checking. I also added the links on the old website. But I forgot to add the link with page under construction. Tell me if it is necessary and I will do it myself. I have some observations regarding this batch: -For "seth coman", I found a picture on the Internet but I am not sure that it is the right one -For "olle aberg" the picture does not work.. don't know why You will definitely see longer and shorter articles because the number of people left to write about decreased heavily and I was unable to find so much information about some people as compared to other people... But, I really did spend a lot of time for each person to look for details such as emails, facebook and work experience. I hope I did a good job. Will wait for your feedback. Regards, Dana
New section edit
This is a test Caterina
BJscout, Audience Call, SCA Society edit
Hi Andrew,
I need some guidance with these companies assigned to me by Ray.
BJscout -no information available on the web, it seems like it is for sale domain name.
Audience Call is it the company about hearing system technology (audience? I am not sure if that's the Audience Call company you want me to write about.
Another thing is SCA Society. What does SCA stands for? Is it the The Society for Creative Anachronism (SCA)?
Thanks, Marie
= edit
Hi Andrew,
Thanks for your reply, I also made my inquiry with Ray and he instructed me to just replace those companies from the list of articles needed because he already looked into those companies and he said he can't also find info about them.
Thanks!
Captcha edit
Sent the email again to andrew@icannwiki.com
Some additional info, not in the email. After receiving you email, I tried working on Internet Explorer, it gave the same error. I thought, it was occuring in my account only, so tried to create a new account, but on the screen of new account, where it asks for the captcha, I still could not see any captcha box, so the error is not with my account. Then I thought, it must be something in my computer, so I used my laptop (right now working on desktop), but I got the same error. Also, past midnight, here in my timezone, so I might not be able to reply you now as I am going to bed. I hope we can fix it till the morning (in my time zone). Muhammad Ali Khalid
Thank you. Have a good day or night (whatever it is in your time zone) :-)
Captcha Fixed.. edit
It is fixed now. I just tried editing an article, and I got the captcha box. its working again. Muhammad Ali Khalid
Edits for the Current Batch edit
Yes, I will keep an eye on your notes on the articles needed page and will edit them. After editing, I will put a signature there, so that you can check the edited article.
- For the education, I will keep it in mind. Should I change for all the articles that I have written and you have not checked yet (that would be all articles in batch 6).
- I will keep the title thing in mind.
- For the NOTOC, I will keep in mind to use it in my future work. should I put it in batch 6 (the one you have not checked) articles myself right now? Muhammad Ali Khalid
- I have a question, you said that education should come last, what about publications, and presentations? Should they come before the education or after the education. It would be great if you can send me the ideal order of headings that you want on the site. Muhammad Ali Khalid
batch 3 edit
Hi Andrew, Thank you for assigning us a new batch of articles. We will be happy to work on it and will start on it once we complete the previous ones. Thanks again!!!! saassoln
Re:Edit edit
Thanks for the appreciation. I made the changes you marked on my user page. For my next batch (7th batch). I have not uploaded the pictures yet, I have put the picture links in the pages but will upload them at the end of the 50 articles. Muhammad Ali Khalid
re:ay! edit
haha, oops! this might start happening more often, i'm keeping normal person hours now. Caterina
Re: Thanks edit
Hi Andrew, Thank you very much for giving me pointers, I will make the necessary changes on the logos. Instructions are noted.
Batch 7 edit
Hi Andrew, You can start checking my batch 7. There was one problem, I mistakenly named Esteban Andujar as Ernesto Garcia and the moved the information to the correct page, because of which both the pages have the same info. Please delete the page of Ernesto Garcia. Thanks.
some problems edit
For some people I am just unable to find more than a line. And when I save a page its category is always the name of the country. The page does not show up in the people listing here as well. I have resized some images but when I upload them they don't match each other. What should I do? Tehreem
Ok thanx. I resized the picture of Jonathan Shea to match in height at least and it does on my computer but not on thumbnail. How do I edit that?
Fixed the category and contents. Yeah I uploaded the resized version. Sometimes I get phone number and city of people. Do I have to mention them as well?
Ok thanx
Batch 7 edit
Hi, I got your point about the explaining the acronym. Yes, you are right, I put the explanation there with it to make it easy for the reader, as sometimes people know the full name of an organization but are not aware of the Acronym. I will use the format that you have mentioned. I fixed issues with some of the articles, for the rest I will do them today or might be tomorrow. Thanks Muhammad Ali Khalid 10:07, 8 April 2011 (PDT)
FIRST BATCH edit
Thank you very much for all the compliments, pointers and guidance you've shared with me. It's really a great help. I made all the necessary corrections as instructed. Again, thank you very much!!! Marie
--- Of course you can do it, when i saw the note "self-editing" i thought i'm suppose to arrange my page as well, just like the way you did it.
The CPA Global--- you commented is this original? It seems like the timeline is longer from the website. Yes it was originally written based from the company timeline. I re-phrased the introductory sentence to make it sound better. Tag-org---i removed the subsidiary companies in the list that are not internet related because it's huge. Bsoft--the photo i downloaded the best resolution i can find nz registry---photo is working now IBM-I added current history as per CP instruction CDT---you commented to double check on the Chairman it appears they have two---Jerry Berman was the founder but not Chairman of CDT but Chairman of IEF---I also added the info. The rest were about photo issues...to use the TAGI logo coz the photos available were too small
Thanks and have a great weekend!!!
Batch 8 and Previous Corrections edit
Hi Andrew. I fixed the problems with the previous articles, you can check them. You can also start checking my batch 8 of articles. Muhammad Ali Khalid 03:17, 9 April 2011 (PDT)
Help needed edit
I was just working on Markus Schnermann, and found this info. It is all regarding his personal life, should I put it in the article? I started writing it in the article but then felt it would make the article personal rather then professional. Let me know Muhammad Ali Khalid 09:18, 9 April 2011 (PDT)
Forwarding Links on ICANNWiki.org edit
Tehreem made a good point here about how missing forwarding links can cause new writers to do unnecessary work. We should probably modify the work description and maybe also have someone go through the balance on ICANNWiki.org again. We can do this when we meet today. Ray
Re: intro edit
Ok i will correct that. Should the name be bold throughout the article? Tehreem
References edit
Yeah, you are right we are hitting the bottom of the barrel. Therefore, I am doing all the articles, instead of handpicking the ones that have a lot of content. Sure, I will double check the articles for references. I have fixed the things you marked on my page. Thanks. Muhammad Ali Khalid
Research edit
I wasn't done with the batch 9. You might have noticed the photo problems and that none of the articles had the underconstruction image. I would have completed the batch yesterday, but there was some unexpected internet connection problem. I revisit the articles while inserting the underconstruction photo to decrease the mistakes. Anyways, there is no excuse for the less research. Though, I will try harder next time. For this batch, I will fix the mistakes you have marked and go through rest of the articles again today. Thanks. Muhammad Ali Khalid
Its complete now. You can start checking whenever you get time and I have also fixed the errors you pointed out.
Forwarding Links from .ORG edit
Noted, Will follow. Muhammad Ali Khalid
Iron Mountain edit
Hey Andrew, I saw you updated the Iron Mountain page with some info from an interview from the conference. Any chance you remember who the person was and can stick it in the ref? Caterina
Category edit
I have edited things according to style guidelines. However I am not getting which categories to add? Should any other category be added to people articles except people and country? Tehreem
Yeah I am checking your comments and I will include these references now. I was wondering whether I should use bullet points or describe things in paragraphs? I generally use bullets because I think that makes the article easy to read. However I would happily edit if anything is not according to the style followed here. Thanks for helping me improve.
I will try improving my focus on everything I get. I do not include things unless I find reference other than ICANNWiki.org(as its going to be removed). So, I have no other option but to skip that part if I don't find any other option.
I am done with adding info to the articles you specified. you can check them
Thu Hue Nguyen edit
I think her name is Nguyen Thu HueMuhammad Ali Khalid
Batch 9 and 10 edit
Hi Andrew I have fixed the errors in batch 9. Also I have completed batch 10. Muhammad Ali Khalid
Latest Guidelines edit
Everything is clear and understood, will follow instructions. Thanks! Marie
Checking articles edit
Hi, I spoke to Ray that we will not include stubs in the articles of regular batches. So, I have changed my page a bit. I will put all the articles under the section "Working" while I am working on them. When I am done with the articles I will move them to section "Being Checked". When the editors check the articles, I will move the regular articles to a "batch" and the stubs to to the section "stub". I hope this is making sense. Let me know if you want to change it. Thanks Muhammad Ali Khalid
Yes.
- I see you converted batch 9 from list to a block. Actually, I made that in the list format to keep track of the number of articles in it. Batch 9 in not complete yet (technically). It has 31 articles right now and it will be completed when it has 50 articles. I will now take the "Checked and approved" articles from being checked section to batch 9 and make a list. When 50 articles are complete, I will put them in a block and start entering "checked and approved" articles to batch 10. I know this is very confusing but this is easy to track as I will only be paid for batches with 50 complete "regular" articles and I will not be able to decide which articles are stubs and which are articles. As my decision will be a bit biased... for obvious reasons :-)..
- The 31 articles in batch 9 are already checked by you. I will mark them with AM and yes, I will only move the edited articles to batches with the signature of the editor..
Mactar Seck edit
I am unable to determine if this this and this are same. Could you please check it.
Thanks
Batch 1 edit
I am done with Batch 1. Please check it and let me know if anything needs to be edited.
RE: Editing edit
I have removed cities and bolded names from articles. What does AM mean?
This article edit
So, this is a lady Melissa Rexach, this is her linkedin profile. There is no apparent connection between her and ICANN or an Internet Company. My guess is that she must have been at the meeting because she worked at the hotel where the meeting was held. Should I put this article here? If not, the please delete her page, its empty. If yes, then let me know.Muhammad Ali Khalid
Batch 2 edit
Thanks for your feedback. I have seen stubs and got the idea. Will compile them separately now. Tehreem
These pages are created accidentally, please delete them. Mukesh kumar Mohammed slaoui Farin farzin
4th batch edit
I am back on the project and started working on the 4th batch. Added 23 profiles upto now. Data on rest of the remaining profiles are hard to locate. For example most of the names does not have a connection with ICANN on google search. Few does have references in ICANN meetings, but does not contain contact points or further details. Please advice on how to proceed.
I have started fixing errors in my previous batch as well. Hope to finish it by tomorrow.
Thanks - User:pulasthi
Site Down edit
Did you notice it was down last night at all? I just noticed it and had to restart it about 10 min ago (8AM) ... Ray
company profiles edit
hi andrew,
Ray suggested that i should take up company profiles to substitute for the rest of the work remaining in the current set. So I hope you can give some guide as to what company profiles you would want me to do and so on.
Thanks - user:pulasthi
Further Instructions edit
So I received an email from Ray that he is busy so you will be helping me...Therefore, I think its appropriate to ask to you what I should do now? As all the people articles have been transferred (the left ones are kids, wives, irrelevant, or they do not have an affiliation, just 82 articles left)Muhammad Ali Khalid
Somewhat yes... the people articles are almost done... I did not do Li qiang because there is a person of the same name who is a domain name hijacker, but this person works with china.org. I am not sure if they are same people or not, or how to put his article together...
Some of the articles are like this:
- Bernardo Dias, may be he is the child of someone who works at FCCN.
- Perryhan Gamal These might be the members of staff or may be they are from some school or college. The uniform.
- Phoebe Baigent These seem to be someone’s kids.
- Arthur Rocha He works at a hospital. Don’t think he would have anything to do with ICANN
- Kawtar Chraibi She is someone’s wife.
- Dakota King She is also someone’s daughter.
- Joana Gueifao She is also someone’s daughter.
The remaining are without affiliation...
10 are left to be checked... Out of the 18 in Being Checked section one is a stub, so I will have batch 11 with complete 50 articles.. Those stubs are already checked by you, I will mark them to avoid confusion. so just the being checked section is remaining to be checked and yes.. there were the templates to 33 articles from sabrina.
Yeah... Sabrina's articles require quite a lot of work. If you see this Don Ham, you might get a hint that she is making things up from her imagination and she has done like that in most of the articles and none of the articles have references... Should I erase this type of "fluff" from the articles? and Should I fish for references and put in them them? or do you just want me to rephrase the articles in a neutral way? I will probably start with her articles tomorrow.
Yeah, it will be harder then writing an article from the scratch.. and I know you people are always fair.. :-) Thanks..
Stubs edit
Hi, Can you get Ray to clear the payment for all the stubs before the 1st of next month? You have a vworker account, so you can understand why I want it before the first. Its not necessary, just a favor. The stubs are all checked except Dakota King.
Also, on your user page Kathy Kleiman, Dirk Krischenowski are misspelled. ThanksMuhammad Ali Khalid
Thanks edit
Yeah, I received the payment. Thanks. I have started working on my new task and I noted that Oscar Robles already has an article as Oscar Robles-Garay. So you might want to delete the former. ThanksMuhammad Ali Khalid
Batch 2 edit
Yeah I got it. I will just complete these articles and then move towards company articles.
re: random edit
pretty sure those people got their pics lost. i'll switch em to the placeholder images. Caterina
List of Companies edit
Hi Andrew,
I informed Ray about some companies assigned to me and he told me to wait for further instructions from you.
- Esoftwiz, de-accredited by ICANN
- Finestnames.com- the domain is for sale...should i still create a page for this?
- Geosign Corporation- went out of business
- Interactive Communications Florida based company website does not exist/unavailable
IBM- I already wrote the company profile from the first batch ICA and Melbourne IT- pages have been already created by other writers
Another thing, JotSpot has been acquired by Google and they launched it as Google Sites.
Thanks Marie
Replacements Needed edit
Thank you for your prompt reply...I need 8 replacements.
Okay, I will write an article about ESoftwiz. Again, thank you for the replacements. Marie
I'm glad you inform me about Iron Mountain.
Second Batch Complete edit
Hi Andrew, I just want to inform you that I already completed the 50 companies. Thanks Marie
Upload Problem edit
Hi Andrew, I am trying to upload a new logo for Google however, I am experiencing a technical problem. I am receiving this warning The upload directory (public) is not writable by the webserver. Marie
Same info edit
this and this profile have same contact info. Is this same man? Tehreem
Lawrence at lawrence.tel is this man and he has got some info. isn't it?
yeah I just compiled it.
Thank You & Interested in Working on New Batch edit
Hi, Thank you very much for all the compliments and I'm following through with your comments on the articles. And Yes I am very much interested in working for another batch. Again, Thanks a lot. Marie
New Batch edit
Thank you and I'm happy working with you.
Company Articles edit
Do company article pages have exactly the same name here as in ICANNWiki.org? Just asking so that there are no clashes this time.Tehreem
Was just busy with some other project which I could not inform earlier. Apologize for the delay in people articles. However I am free now and just starting company articles. Tehreem
Do I have to wipe the article from the older site? Should it also contain only ICANNWiki.com category? What categories should I use for new articles here? I remember there was a list but I can't find where you mentioned that.
Replacement Articles edit
Please provide us replacement articles for the companies which I have already mentioned.Also, as I said earlier Dreyfus and associés Company is in my list of 50 companies and I have a written an article on it, but someone else has already posted this article on icannwiki. Do let me know what to do?Anaya
Seomoz edit
Started working on Seomoz and got to know it already existed as SEOmoz. You may delete it.Tehreem And delete Nicline.com as well.
Netster edit
It is a search engine as describes by a few sites but generally i am finding negative reviews and hatred for it all over the place. People say its some malware like thing. Should I go on? There is not much info about it though. Not even their own about us page works. Tehreem
I think its a stub. People don't like it because it just pops up itself when they are searching somewhere else.
Batch 2 edit
I am short of 7 articles in completing my batch 2 and there are hardly any articles left now. Even if there are they are stubs. Should I start wiping the pages from .org so that we can get an idea if there is anything left? I have noticed changing the category doesn't remove it from the companies because it is default with the template i think. Tehreem
I am wiping old site and if I find any articles that are left I will create them here.
Batch 2 edit
I have started three new companies and I see there is some good information about them out there. The problem is that I have got two academic projects today (my 4th semester is ending on 27th May). Therefore, I have decided not to destroy these articles in hurry. I would rather suggest you assign them to someone else.
However I would be able to edit previous articles so you can start checking them. Also I will wipe the pages from old site (60 done already). Can you please inform other writers if they take help from previously written article they can still see it in history? Or if its difficult for anyone, contact me I will provide that material. (Just making sure nobody gets lost in whats going on.)
Articles to assign are Rackspace Managed Hosting, JotSpot and Outblaze.
Waiting for your further instructions. Tehreem 06:24, 18 May 2011 (PDT)
No not the articles which still need to be moved. But if someone was going to take help from the older ones if they have not completed yet. Should I report work complete on vworker? I am left with dead line of 4 days there.
Ok then extend the deadline. I will try to do them as soon as possible. But maximum 3 days.
Thanks for your cooperation.
Re:How is it edit
Hi.. Yeah I am well. Actually, I have a lot on my plate this month. Last month I worked full time on the site and have a lot of work from other employers, so I am not able to work much on ICANNWiki. I will be working on the site, won't do a lot of work, but will try to work steadily. Thanks for checking out...Muhammad Ali Khalid
Duplicates edit
Hi Andrew, it's okay, Tehreem and I were able to work things out. He suggested that I put a template on the company's I'm working on. I also want to inform you that JotSpot doesn't exist anymore because the company has been acquired by Google and they launched it as Google sites.Just want to let you know...Thanks! Marie
NI edit
Hi Andrew, I don't know what NI stands for, I am assuming it's NIC.NI the domain name for Nicaragua? How would I be able to change the page I created from NI to NIC.NI? Thanks! Marie
Awesome welcoming job! edit
for John Walubengo
I like! edit
Andrew,
am totally blushing (quite hard for a black guy ;-)
But hey, u have given me a makeover CV that makes me look really good. And the best part of it is that all of it is true ;-)
regards and thanx a million for providing me a new dimension that I had known but not seen about myself.
walu.
New project edit
Hi, Last night I received an invitation on vworker for fixing Sabrina's articles. In that project, Ray has specified the bid for fixing 43 articles. However, there are only 32 articles. So you might want rethink the compensation on that project. Muhammad Ali Khalid
One More Thing edit
Hi Andrew! I am done with the articles I was working on. I think you have already given me a lot of favours, can I ask for a little more help? Could you please wind up my Batch 2 with the articles I have done? They are 47 I guess. I don't think I will be able to continue for a while. Do let me know what are your plans. Regards. Tehreem
Yeah I can do the editing stuff. You can start checking them.
Editing edit
I am done with the editing as you specified. Hope to see you again after exams. Tehreem 21:15, 28 May 2011 (PDT)
progress edit
Hi Andrew, Sorry for the slow progress. We have written some articles but did not post them, we apologize for that. We are posting them now. We have total 21 articles completed including the posted ones. We will be posting 2-3 articles a day. Inform us if this plan is not appropriate.
Sorry for the inconvenience. Saassoln
Replacement edit
Hi Andrew, I think I need 3 replacements. Thanks! Marie
Copy paste issues edit
Hi Andrew, We apologize for the NSI article. Our writer had referred the Wikipedia article for background research but some parts like people's names got repeated. We are sorry for that. we checked all the other articles from batch 2 on Copyscape and no other article is showing copied content from Wikipedia. Some article show words used from the reference links, We have corrected them too. We will take care not to repeat this mistake again. Thanks Saassoln
A bit change edit
Hi Andrew. I learnt that Dave Crocker is the brother of Steve Crocker, so I added this information at the top of Steve Crocker article. You worked Steve Crocker's article a few days ago. Just thought to notify you so that you can check.. Muhammad Ali Khalid Also, I am placing a -Done after the articles that I have completed. You can check them if you want to. and I saw that addition of Arabic article of Mr. Zoman, its a really cool addition, though I couldn't read it. :-)
Batch 3 edit
Hi Andrew, I just want to inform you that my third batch of articles is finished. Thanks! Marie
Batch 1 complete edit
Hi Andrew. We are done with the first batch of 50 companies. It was a nice experience working with you.Looking forward to second batch of articles.Thanks. Anaya
IEEE edit
I overlooked that company and unable to count it when I asked ask for replacements. Thank you very much.Marie
Thank you very much!!! I am currently working on the .com page and yes i'm still available to work for another batch. Again, Thanks! Marie
EDITING edit
I'm finished with the .com page and made necessary changes with the other companies MCI, Markle, NIC.CI and IEEE---I can't find references regarding ICANN and IEEE overlapping but I Included Vint Cerf in the article being and IEEE fellow and recepient of IEEE awards. I'm looking forward for the next batch. Thanks! Marie
Thank you very much! I'm glad to continue to work with you.Marie
How can I create a caricature for the people? Marie Thanks! I will let you know if I have other questions.
Special project edit
Yes, I can take the work. Since you have told me 10 days before the actual work, I will make sure that I don't have much work from 19-24. I can give almost 5-7 hours per day or more if needed. Muhammad Ali Khalid
Great... I will be waiting...
CP and AM edit
Hi Andrew,
We would need some help with CP and AM. What Do These Stand For?
Noted a thing edit
On the main page a line goes like this "We are in the process of migrating content from the original site to the new site, here at ICANNWiki.com." Now, the link to the original brings us back to the .COM site since .ORG has been redirected to .COM. Shouldn't this line be changed?Muhammad Ali Khalid
Back edit
Hi Andrew! How is everything going? I am free now. Anything I can do? Tehreem
Seems like things are going very busy...? Waiting to here from you soon...
Re: More Details edit
I get it. No I don't have any question, but just a concern. You said last time you people added 200 articles to the site. Which means almost 40 articles per day. I don't think so that I can add 40 articles in a day, even If I work 8 hours. Even stubs take a lot of time; to determine a person has no information on the internet, extensive research is required which takes time. Can I get 2-4 days after the conference as well as working on the days of the conference to wrap up all the work? No need for a vworker project. You can send a direct payment through vworker after I have done the work.Muhammad Ali Khalid
ICANN Article edit
Awesome job you're doing with this article! Ray